Jump to content

50 deluxe

Contributing Members
  • Content count

    107
  • Joined

  • Last visited

About 50 deluxe

  • Rank
    Advanced Member

Recent Profile Visitors

2,040 profile views
  1. 1950 Plymouth Special Deluxe sedan Parts car

    I am looking for a trunk floor pan for a 1951 Plymouth. 50 DELUXE
  2. Trunk Lock cylinder replacement

    I just watched the film on the Trunk lock repair. Great info, also there is some great info on other problems. Thanks for posting. 50 DELUXE
  3. Rear Axle

    You might think about a S 10/15 complete rear end up to the year 1993 is 54.5" backing plate to backing plate. The 1950/52 Ply. is 58 7/8" backing plate to backing plate. Leaf springs can be made to work. . Good gear ratio choices. Drive shaft can be made to bolt up to Ply. tran's Good luck 50 DELUXE
  4. WITH ING. KEY OFF AMP METER SHOWS MAX DISHARGE

    Well I think I have solved my charging ( regulator ) problem. A bad ground from the regulator to the body, I hope. It seams to have solved the problem Thanks for all your help. Robert 50 DELUXE
  5. WITH ING. KEY OFF AMP METER SHOWS MAX DISHARGE

    Now all I have to do is figure out why this happened. Could it be the system is over charging? I will check this today. Robert 50 DELUXE
  6. WITH ING. KEY OFF AMP METER SHOWS MAX DISHARGE

    You nailed it rekbender. The cut out relay in the regulator was stuck. I remember in the old days, some times if you give the relay cover a good wack it would break the points lose. I know this is not a permanent fix & the regulator will have to be replaced. But for now the car is deliverable. Thanks, Robert (50 DELUXE) PS. My wife's method for fixing things is, give it a good wack !!!!!
  7. 1950 PLY SPECIAL DELUXE 6 CLY. W/ ING. KEY IN OFF POS. BATT. IS DISCHARGING AMP METER SHOW MAX DIS. CHARGE. REGULATE GETS VARY WARM. BATT. WIRE TO REG. ALSO GETS WARM. WHEN ING. KEY IS PUT IN THE RUN POS. AND MOTOR IS NOT RUNNING AMP METER RETURNS TO 0. ( NEUTRAL ) WITH MOTOR RUNNING AMP METER SHOWS HIGH CHARGE RATE AT ABOUT 1500 RPMS. THANKS FOR YOUR HELP 50 DELUXE0
  8. I found a replacement tumbler on E-bay 50 DLUXE
  9. 1950 P20 TRUNK HANDEL W/ WORKING LOCK & KEY

    I found a working lock tumbler on E-bay. Thanks for your help. 50 DELUXE
  10. That's is just what I did. The local lock smith has been in business for 76 years, I figured if any one could fix it they could. They said the tumbler is damaged and could not be fixed and they did not have a tumbler that would fit. That is why I am looking for one on line. 50 DEUXE
  11. I am looking for a working lock tumbler & key for my 1950 P20 Plymouth trunk. I am willing to buy the complete trunk handle to get a good working lock & key. 50 DELUXE
  12. OVERDRIVE

    I have a 1950 P 20 Plymouth w/a 3 seed trans. Are there any other over drives available for this car other than the stock over drive? I know there are some after market over drives out there. Has any one used one?
  13. Dog house removal.

    I think he is talking about the part of the floor that covers the transmission. Yes that cover can be removed on my 1950 Plymouth P 20 50 DELUXE
  14. OVAL SLOT TUBELESS TIRE VALVE

    Your right but I have 1 that leaks. I took it apart and put sealer around it, so far it is holding air. Some ware I think I remember seeing the smaller 5/8 x 3/4 size. Robert
  15. I need 5 OVAL SLOT TUBELESS TIRE VALVES. size 5/8 x 3/4. I have 5 Milton # 476 size 5/8 x 7/8 that are to large. Milton does not have the size I need. Thanks 50 DELUXE
×